For screen reader problems with this website, please call606-528-06626 0 6 5 2 8 0 6 6 2Standard carrier rates apply to texts.

    Audio-Technica Dual Moving Coil Cartridge


    Model #:

    AT33PTG/2

    Model #: AT33PTG/2
    343373
    Audio-Technica
    $99,999.00

    At a Glance

    Product Dimensions 0.63"h x 0.65"w x 1.04"d

    The AT33PTG/II dual moving coil cartridge features a Microlinear stylus that, with its small curvature radius, delivers low-distortion, high-range performance, even when playing the inner circumference of a record.Read More

    Call for Best Price

    Get to know this product.

    Product Overview

    Product Overview

    The AT33PTG/II dual moving coil cartridge features a Microlinear stylus that, with its small curvature radius, delivers low-distortion, high-range performance, even when playing the inner circumference of a record. The Microlinear stylus, which has an average life span of around 1,000 hours, is mounted on a nude tapered boron cantilever with a double damper for reduced weight and better audio quality.

    The cartridge’s two coils provide excellent channel separation and are affixed within a strong, lightweight mold made of hard resin to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

    Moving coil cartridge with Microlinear stylus delivers exquisite, full-range audio reproduction

    Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies

    Neodymium magnet and permendur yoke dramatically enhance the magnetic energy

    PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer

    High-separation, wide-response dual moving coil

    Strong, rigid housing limits unnecessary vibration

    Precision-cast hard aluminum alloy body enhances rigidity and the signal-to-noise ratio

    Specifications

    General Specs

    Product Weight (lbs.)0.02
    Depth (in.)1.04
    Width (in.)0.65
    Height (in.)0.63
    Manufacturer Warranty1 Year

    General

    Frequency Response15-50,000 Hz
    Channel Separation30 dB (1 kHz)
    Vertical Tracking Angle23°
    Vertical Tracking Force1.8-2.2 g (2.0 g standard)
    Recommended Load ImpedanceMore than 100 ohms (when head amplifier is connected)
    Coil Impedance10 ohms (1 kHz)
    DC Resistance10 ohms
    Coil Inductance22 µH (1 kHz)
    Output0.35 mV (at 1 kHz, 5 cm/sec)
    Channel Balance0.5 dB (1 kHz)
    Stylus ShapeMicrolinear
    Stylus TypeNude square shank
    Stylus Curvatre Radius2.2 x 0.12 mil
    CantileverGold-plated nude tapered boron
    Static Compliance40 x 10-6 cm/dyne
    Dynamic Compliance10 x 10-6 cm/dyne (100 Hz)
    MountHalf-inch
    Weight6.9 g (0.24 oz)
    Dimensions16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D
    Accessories IncludedNon-magnetic screwdriver; 2 washers; 2 nuts; cartridge installation screws (13 mm × 2, 19 mm × 2); plastic protector; brush; PCOCC lead wire set

    WarningProposition 65 Warning for California Residents